How To Connect Raspberry Pi To Laptop Using HDMI?

Raspberry Pi is known as the “Pocket Size Computer,” and it does work great for some projects, but we can’t always bring a laptop with us everywhere we go, so if you’re stuck on a problem and don’t have access to a computer monitor, you might feel stuck at first. But no need to worry because there is still a way to use your laptop as a display for raspberry pi.

Read More: 10 Best Laptops For Cs Majors

This article is about one of our proudest Raspberry Pi projects. Some of the most common doubts raised with people who are new to Raspberry Pi are building designs, computing power for projects with multiple computational systems, etc. We try to make it super easy to get started with any project you might be working on by showing you how to connect raspberry pi to the laptop using HDMI. So, sit back and enjoy this simple article.

How to connect raspberry pi to the laptop using HDMI:

We came up with this article because All you need to do to connect your raspberry pi to a laptop display is follow these simple steps. These are the stuff we need:

  • Raspberry Pi.
  • Ethernet Cable.
  • Laptop.
  • SD Card with Raspbian.
  • Micro USB Cable. (Optional)
  • Number of Components required for setting it up the first time:
  • HDMI/ AV Display.
  • Keyboard and Mouse

Step 1: How does it work?

To set up a Raspberry Pi display, you can use an ethernet cable. The desktop GUI of the Pi can be viewed through the laptop with a network connection using a 100Mbps ethernet connection between the two. Many software’s available that could establish a connection between the Pi and your laptop, including the VNC server.

Which you’ll use to remotely access your Raspberry Pi with your mouse and keyboard as if you were sitting right in front of it – meaning you can put your Raspberry Pi where ever there’s an ethernet source but still control; it remotely from your computer! It also means that you can share the internet with the pi wirelessly from your laptop/desktop over its network.

Read More: How To Connect Camcorder To Laptop For Live Streaming?

Before moving forward with connecting your Raspberry Pi to a touchscreen, you should have an SD card with the operating system preloaded. There are many tutorials online for installing the OS onto an SD card yourself, but if you’re new to this process, downloading our free beginner’s guide that shows you how to install Raspbian is guaranteed to get you started quickly and easily! After setting up your SD card, pop it into your Pi and connect a micro USB power source. Next, connect your Pi via ​​​cable​ ​to a laptop or PC and connect a mouse and keyboard. All you need is a monitor or television capable of using HDMI because this will display the interface when booting up! Once these steps are complete, power on the Pi to begin connecting raspberry pi to the laptop display, step by step.

Sharing Internet Over Ethernet:

Step 1

Step 2 explains to you how to share your laptop internet with the Raspberry Pi via Ethernet cable. In Windows:

Step 2

Go to Network and Sharing Center for sharing the internet among other users over Ethernet. Once there, click on the Wi-Fi network.

Step 3

Give a name to the new connection and disable any other previous connections from before this point.

Step 4

Click on Properties, then go to Sharing and “Allow other network users to connect.”

Step 5

Make sure that the networking connection is changed to “Local Area Connection.”

Step 6

To assign an IP address to the Ethernet port of your laptop and other devices connected to it, you can follow the steps shown below. To confirm that this has worked, ask someone with another computer to try pinging your laptop’s IP address which will be something like 192.168.137.1 depending on how your network is set up (the benefit of setting up a static IP like this is that it will remain constant over time). Type l2ping -c 3 192.168.137.1 in a terminal window on either machine or applet to see if they are indeed correctly communicating over the local area connection.

Setting Up the VNC server to connect Raspberry Pi to laptop Display:

If you have an HDMI display on your Pi, you should start the VNC server using the following commands: 

$ sudo apt-get update

$ sudo apt-get install tightvncserver

You do not need to worry if you don’t have an HDMI display. Via SSH, install Putty on your window then you can connect your raspberry pi. After getting access to your pi terminal, run the same command above to install VNC.

In the SSH terminal, enter the following commands to start VNC.

$ vncserver:1

You will receive a prompt to enter and confirm a password. This will during the first-time setup it will ask. Enter an eight-digit password to run the VNC server.

Read More: 10 Best Laptop For Social Media Marketing

Setting Up the Client Side

Step 1

Download the VNC client and install it. When you first run VNC viewer.

Step 2

Enter the IP address of your raspberry pi, which you got from the earlier step. Then press connect. A warning message will receive; press ‘Continue.’

Step 3

Enter the eight-digit password which was entered in VNC server installation on raspberry pi

Step 4

Finally, the raspberry pi desktop will itself appear as a VNC window. You will be able to access the GUI and do everything, as if you were using the pi’s keyboard, mouse, and monitor directly. Open VNC Viewer and input the IP address of your raspberry pi. The Windows computer can now utilize its display for raspberry pi projects.

How to connect Raspberry Pi to laptop without ethernet cable?>

Step 1

Download Etcher to flash Raspbian OS onto the SD card.

Step 2

First, remove and reinsert the SD card to view the little FAT32 partition on the SD card; it’s For Windows and Mac users.

Step 3

Which file created on FAT32 portion, assign name ssh to that file.

How to connect Raspberry Pi to the laptop using VNC?

Step 1

On your Raspberry Pi, open the VNC server.

Step 2

Open menu item Options and select “Troubleshooting” to access the experimental Direct Capture Mode.

Step 3

Utilize VNC viewer to gain control of the machine then connect to the device.

How to connect Raspberry Pi to the laptop using Putty?

Step 1

Download and install Putty. Directly lunch and Install from putty.exe.

Step 2

Connect with raspberry Pi with SSH usage; under the window, choose UTF-8 type of translation.

Step 3

Click on the open option for login. The standard user is called Pi.

Read More: How To Decorate Laptop With Stickers?

Conclusion:

If you’re regularly connecting an HDMI cable to your Raspberry Pi, please stop at once and take advantage of at least one of these suggestions. Probably the cheapest way to solve this problem is by using an HDMI splitter. However, if you have access to a computer with a VGA port and an internet connection, then taking advantage of SSH and VNC connections will allow you to entirely allocate your Pi its display without using an extra cord.

We’ve given you one of the easiest ways how to connect raspberry pi to the laptop using HDMI. Don’t hesitate to contact us if any difficulties arise; we’d love to hear from you! You may find some other guides on our website here.

FAQ’s

Q1: Can I use Raspberry Pi on a laptop by using it as a monitor?

The trick of using a laptop as a monitor for Raspberry Pi is great. For doing so you don’t need extra purchasing of tools and soldering but only a  network cable is required for this great heck.

Q2: Is there any way to connect Raspeberry Pi to the laptop via USB?

For this heck, you need to connect Raspberry Pi to a USB port to use WIFI dongles. Power the Raspberry Pi by plugging in a power adapter. Connect the power adapter to the wall outlet and turn it on. After connecting the power outlet, Raspberry Pi will be powered on.

Leave a Comment