Table of Contents
Improve laptop performance windows 10
Windows 10 is a Microsoft launch in an extremely bold direction with aesthetic changes and improved features. This advanced operating system is well regarded for good performance but still users encounter some issues like reduced speed and clogged processes.
Improving Windows 10 performance isn’t much hard. If you are concerned about performance issues after installing Windows 10 and want to optimize it then you have come to the right place. This article will cover a few tips about how to improve a laptop performance with windows 10. Just follow the manual cleaning steps to boost Windows 10 performance and speed.
HOW TO IMPROVE LAPTOP PERFORMANCE-WINDOWS 10?
Even though Windows 10 is an efficient and leaner operating system, the performance of your laptop can get slower anytime and the reasons could be many, like viruses, bugs, malwares, defragmentation, compatibility issues, and even some sort of hardware failures. Have a look at some factors that are slowing down your laptop with Windows 10 and get rid your machine of such issues.
DISABLE STARTUPS APPS:
A lot of programs startup as you switch on your PC and it is because many applications have automatic startup behavior. These apps installed on your laptop can configure themselves to start automatically when the system boots up. Such apps run in the background without notifying you that slows down speed and efficiency of your Windows 10 laptops by wasting valuable resources.
However, if these apps are not in daily use then don’t worry. You can easily disable them with just a few clicks to improve a laptop performance with windows 10. Follow these steps:
STEP # 1: Go to ‘Settings’ and click on ‘Apps’.
STEP # 2: Click on ‘Startups’ and the go to ‘Sort By’ menu.
STEP # 3: Now, select ‘Startup Impact’ option.
STEP # 4: Turn off the toggle switch for apps that aren’t frequently used especially those apps that are marked as High Impact.
STEP # 5: Then ‘Restart’ your laptop to run it smoothly like normal.
NOTE: Keep in mind that the performance boost will vary, depending upon your disabled applications and hardware configuration. If heavy startup applications are still enabled then obviously your system can lag.
SWITCH OF VISUAL EFFECTS:
Turning off visual effects can also optimize and improve a laptop’s performance with windows 10. Microsoft has made disabling these visual effects quite easy. Have a look:
STEP # 1: Go to ‘System’.
STEP # 2: Open ‘Advanced System Settings’.
STEP # 3: Now, select ‘Advanced’ tab and Select ‘Performance’. After that, open ‘Settings’.
STEP # 4: Check the ‘Adjust for Best Performance’ radio button to disable visual effects.
After disabling this feature the visuals will be downgraded but you’ll begin to see its advantages shortly.
DISABLING RELAUNCH APPLICATIONS ON STARTUPS:
In Windows 10, a feature was designed to provide quick access to your frequently used apps. In this feature, some applications can automatically restart from the last session right after a reboot. This automatic loading of apps at startup can impact performance.
You can disable this feature to improve a laptop performance with windows 10 by performing the following steps:
STEP # 1: Go to ‘Settings’.
STEP # 2: Click on ‘Sign-In’ tab.
STEP # 3: Go to ‘Privacy’ section and turn off this feature. If you are unable to disable it there may be a tab with the text ‘Use sign-in info to automatically finish setting up device’ or ‘reopen apps after an upgrade’.
MANAGING WINDOWS UPDATES:
Windows 10 offers heavy automatic updates that consume a lot of resources. The overall system performance can be improved by changing updates setting according to your requirements. There are three options available to deal with system updates. You can:
- Change settings to run at special hours
- Disable updates
- Make Internet connection a metered one for updates
You can use any of the above-mentioned options for system updates to boost up performance by following these instructions.
- In your Windows search bar, type ‘Windows update settings’ and turn off the toggle switch to disable updates simply.
- To run settings at specific hours, type ‘Windows update settings’ and click on ’Configuration Utility’. Then go to ‘Update Settings’ and click on ‘Change Active Hours’ to set your preferred time.
- For setting metered Internet connection, go to ‘Windows Settings’ and type ‘Network and Internet’ in the search bar. Then go to ‘WIFI Settings’ and choose your current network. Click on the ‘Metered Connection’ tab and toggle the switch button to ‘ON’ to set it as metered connection.
HINT: Metered Connection setting is only applicable for WIFI connections. Windows 10 doesn’t support metered Ethernet connections.
DISABLING BACKGROUND APPS:
Some applications can run in the background even if they aren’t in use. Also, by engaging system resources they affect productivity.
To improve a laptop performance with windows 10, disable applications that runs automatically in the background or you can completely disable the feature as well. Follow these steps to disable background apps:
STEP # 1: Go to ‘Settings’.
STEP # 2: Click on ‘Privacy’ tab.
STEP # 3: Then move the cursor to ‘Background Apps’ and click it.
STEP # 4: Click the toggle switch to ‘OFF’ for applications that you want to disable.
DISABLE TIPPINGS:
Windows 10 has a very user friendly interface that always shows popup tips to its user in the best possible way. This feature was designed to provide better working experience but it came out as annoyance by disrupting system performance.
Moreover, this feature scans the entire system before popping up that slows down the system. So, if you are familiar with Windows 10 efficiently then you can turn off these tips to improve a laptop performance with windows 10 by following easy steps.
STEP # 1: Go to ‘Settings’.
STEP # 2: Select the ‘System’ tab.
STEP # 3: Click on the ‘Notifications and Actions’ and switch off tips.
STEP # 4: It is better to restart your laptop after disabling tips.
UN-INSTALL UNNECESSARY APPLICATIONS:
Every device has some pre-installed applications that are not very useful for many users. Such apps are total wastage of space. Also, these apps silently utilize your resources in the background. This might be the reason behind the slow performance of your laptop. So, it’s better to uninstall such apps that are not in use.
To increase system performance by uninstalling apps, follow these steps:
STEP # 1: Open ‘Settings’ and click on ‘Apps’.
STEP # 2: Select ‘Apps and Features’ and select the app you want to uninstall and click on the ‘Uninstall’ button.
STEP # 3: After uninstalling applications, restart your system once.
Repeat the process every time you uninstall the app.
POWER SETTINGS:
Many users turn on ‘Power Saving Mode’ to save battery. Do you also use this mode? Wait! For your information, this mode saves energy at the cost of performance. Well, that’s true. In Windows 10, ‘Power Saving Mode’ affects working performance.
In case you are utilizing this mode then switch back to ‘Balance’ mode or ‘High Performance’ mode to boost and improve a laptop performance with windows 10. Follow these steps to switch modes:
STEP # 1: Go to ‘Control Panel’.
STEP # 2: Select ‘Hardware and Sound’ options and move to ‘Power Options’.
STEP # 3: After heading over to ‘Power Options’ click on ‘Balance’ mode.
STEP # 4: In case you want ‘High Performance’ click on ‘Show Additional Plans’ and select accordingly.
Don’t forget to close ‘Control Panel’ after you are done with settings.
MANAGE HARD DRIVE SPACE:
If your hard drive is filled up, then your performance will never be as per demand. It doesn’t matter whether your drive is SSD or HDD; if it has bottlenecks then your performance will always be downgraded.
Despite upgraded hardware your tasks are taking longer to precede then for sure your drive is running low on space. So, manage your disk space to remove performance issues. Have a look at the steps to clean your disk.
STEP # 1: Go to ‘Settings’
STEP # 2: Click on ‘System’ tab and then on ‘Storage’.
STEP # 3: Click on ‘Temporary Files’ under local disk settings.
STEP # 4: Look for the files you want to delete and click on ‘Remove Files’ button to delete.
BONUS TIP: Always select individual files to remove because selecting the entire folder will results in removing all files inside that folder.
CHECK PC FOR VIRUSES & MALWARE:
Windows 10 has strong Windows defender antivirus protection but there may be a possibility that your computer is infected with malicious codes. Malware, Spywares, adware, viruses and other such programs are well known for slowing down the performance of computers because they take up a lot of system space.
If you are doubtful that your laptop has some sort of virus or malware, clean it immediately by scanning. Scan your system to improve a laptop performance with windows 10. Follow these simple steps.
STEP # 1: Go to ‘Start’ menu.
STEP # 2: In the search bar, type ‘Windows Security’.
STEP # 3: Click on ‘Virus and Threat protection’ and select ‘Check for Updates’ button.
STEP # 4: Select ‘Scan Options’.
STEP # 5: To completely scan your system, click on ‘Full Scan’ and then select ‘Scan Now’.
If your Windows Defender antivirus protection isn’t running properly then you can run the offline scan as well. Just follow these steps.
STEP # 1: Go to ‘Start’ menu.
STEP # 2: In the search bar, type ‘Windows Security’.
STEP # 3: Click on ‘Virus and Threat protection’.
STEP # 4: Select ‘Scan Options’.
STEP # 5: To scan your system, click on ‘Full Defender Offline Scan’ and click on ‘Scan’.
After complete an online/offline scan your system performance will increase noticeably. Also set your PC for automatic scan after a particular time frame to protect your device from such programs.
DISABLING SEARCH INDEXING:
Windows 10 has an important and efficient search feature to serve users but the indexing part utilizes a lot of system resources while you are working. This search index could be a reason if you are using low end systems.
Users, who are good at remembering file locations, can disable search indexing feature to optimize their system. Follow the instructions to disable it.
STEP # 1: Open ‘Settings’ menu and click on ‘Search’ option.
STEP # 2: Then click on ‘Windows Search’.
STEP # 3: Now,‘More Search Indexer Settings’ will be appearing on the screen. Under it, you’ll see ‘Advanced Search Indexer Settings’. Click it.
STEP # 4: Click on ‘Modify’ and select ‘Show All Locations’ button.
STEP # 5: Clear all selected locations appearing on the screen. Click OK to proceed.
After disabling this feature, Windows 10 will no longer index the file locations. Don’t worry! You’ll be able to see run Windows search.
UPGRADING WINDOWS:
Upgrading Windows 10 from an older release to the latest one can improve performance in many ways. Follow these steps to update Windows 10.
STEP # 1: Open ‘Settings’ menu and click on ‘Update and Security’ option.
STEP # 2: Then click on ‘Windows Updates’.
STEP # 3: Click on ‘Check for Updates’. After that, click on ‘Download and Install’ button under the ‘Feature Update’ section.
STEP # 4: After completing the process click on ‘Restart’ button to restart your system.
OTHER IMPROVEMENT OPTIONS:
You can boost up system performance by some other options like upgrading system memory, upgrading your PC with faster device, enabling Ready-Boost, installing only good quality apps, updating device drivers, and running defragmented tool etc.
CONCLUSION:
Windows 10 is a premium OS in the market and according to me, the best to work with. You only have to follow a few tips and tricks to improve a laptop performance with windows 10. These tips will not take you much time.
Let us know if this article comes out to be helpful for you.