Table of Contents
You may use your laptop for work, play, even school if you’re a student. We need to open the laptop so we can use it accordingly as needed. Opening the laptop won’t break it. Laptops are designed to be opened and closed easily. The laptop performs versatile functions. But if you do not take care of the maintenance, the PC will probably reduce its lifetime significantly.
Read More: How To Connect Camcorder To Laptop For Live Streaming?
So, in case of any problem, you need to open the laptop to reset this problem. If you lack the knowledge of pc/laptop assembly/disassembly, do not open the laptop and bring it to a technician. It will tamper with the warrant, but if you want to tackle such things, you can open the laptop with the help of Internet knowledge.
How to Open Hp 15 Laptop?
This guide will show you How to Open the HP 15 Laptop. In Part 1, We will cover taking apart the notebook base, and in Part 2, we will remove the screen from its housing and separate it from all the parts that remain attached.
Before you begin to Open Hp15?
- Turn off your computer and all peripherals.
- Bring along a pair of tweezers and a Phillips-head screwdriver.
- Make sure that the cables are disconnected as well as the power strip.
- Then carefully unscrew the screws from the back of your computer that keep it from moving around too much during play or from being exposed to dust that might otherwise reduce its lifespan.
Step 1
Always start with removing the battery. If you want replacement of battery then they are available. Remove one securing the optical storage device (yellow circle). Pull the optical storage device out and remove it. Remove all screws securing the bottom case. Peel off the bottom foot from the case to access the hidden on both sides of your notebook PC.
Step 2
Use your box cutters to separate the palm rest from the bottom case.
Step 3
Unscrew the keyboard and remove it from your laptop. Make sure you don’t lose any of the screws that hold the keyboard securely in place.
Step 4
Remove the screws from the hard drive using a Phillips screwdriver. Swap out your old hard drive with a new solid-state drive using the same mounting bracket from the old drive. To release the cable, carefully uplift the locking tab—release cable from the connector.
Step 5
Remove the hard drive from the laptop. The normal hard drive doesn’t have enough space, so use a 2.5 SATA solid-state drive to improve laptop performance. It would help to transfer the mounting bracket and the SATA cable to change the hard drive with another drive or SSD.
Read More: How To Improve Laptop Performance Windows 10?
Step 6
There are two memory slots in HP 15.16GB (2*8GB) DDR3-12800 SODIMM RAM modules can be installed in these slots.
Step 7
Remove screw from USB LED status board. Then remove the cable from the motherboard.
Step 8
Disconnect USB LED status board. Now remove the screw from the optical CD DVD drive connector board. Again disconnect from the motherboard.
Step 9
Disconnect optical CD DVD drive connector board from the laptop.
Step 10
Remove cooling fan screw and unplug fan cable.
Step 11
Remove the fan from the motherboard.
Step 12
Disconnect the Wi-Fi antenna cable from the wireless card and display video cable. From the motherboard, remove the DC power jack harness.
Step 13
Collect all cables and remove the screw from the display hinge.
Step 14
By opening the hinge, remove the DC power jack.
Step 15
The power button board is mounted behind the top panel of the computer, which is attached to the keyboard by a hinge. First, remove one from the bottom edge of the keyboard bezel, releasing it from its mounting inside the computer.
Read More: How Long Does A Laptop Last On Average?
Step 16
Remove the screw from the wireless card and remove cared from the slot.
Step 17
From the motherboard, remove five screws and remove the keyboard cable, touchpad button board cable, and speaker’s cable.
Step 18
Now remove the motherboard and see the other side of the motherboard. In HP 15 notebook PCs, the keyboard is permanently attached to the top case with rivets. The touchpad button board is glued to the top case but can be easily removed.
It’s necessary to replace or try a repair hack when the keyboard fails, but you don’t have to replace your top cases if your touchpad buttons break down.
How to Open HP 15 Laptop LCD screen:
This part of the disassembly guide is not dependent on the previous steps. The only thing you’ll need to do before you start is to detach the battery to ensure that it doesn’t get damaged.
Step 1
Install the display bezel; you need to start on the top and move the side until it unfastens. You will then need to remove the adhesive tape at the bottom of our new bezel and attach it to the bottom of your screen.
Step 2
Completely remove the bezel.
Step 3
From the LCD screen, remove four screws to the side brackets.
Step 4
Hang the LCD from the rear of the keyboard. Turn it over so that the screen faces down and then flip open the keyboard, exposing where you can plug in your video signal cable.
Step 5
Remove the backlight from the LCD screen completely and replace it if necessary. If the original screen’s model number isn’t available, you can still find a suitable replacement using the numbers.
Conclusion:
It’s great to know how to open an HP 15 laptop! It’s important that you understand how to take it apart, maintain it, and put it back together again to be able to charge for doing all these things. When someone asks you about this, make sure you are confident in this field because people are willing to pay money for services like this. It’s crucial that you can sort out this all in a timely manner to prevent yourself and others from frustration.
If you were using compressed air, you need to clean it every 3 months to dislodge whatever dust you can to prevent it from accumulating over time.
FAQ’S – How To Open Hp 15 Laptop?
Q1 – Can I disassemble my laptop safely?
Yes, with some easy steps you can do so efficiently.
Q2 – How to open an HP laptop easily?
Here are the steps to do so:
- Firstly, Turn off your computer.
- Put the laptop in a way that its bottom faces outward.
- Release the battery module.
- Take out the screws to reach the hard drive.
- Remove all the screws carefully.
Q3 – How to take off the back of the HP laptop?
Follow these steps to take of the back of your laptop:
- Turn over your laptop.
- Get a plastic opening tool to open the laptop’s case.
- Check the perimeter of the laptop.
- Keep the tool in front and back half of the hammerhead.
- Remove the lid cover by pulling it up.
You are done