How To Use Anti Static Wrist Strap Laptop? – Full Steps Guide 2021

safety measures should always be followed while dealing with electronic devices. Working on gadgets in a safe environment is necessary because you just can trust manufacturers every time, and any hazard can occur out of nowhere. A variety of safety gadgets are available in the market to be safe while repairing or dealing with a device, and an anti-static wrist strap is the most famous one.  

What is an anti-static wrist strap?

If you are a bit familiar with electricity and electronics then you must be aware of the fact that to develop a current flow, a slight potential difference exists between the two bodies. The wrist strap does the job of maintaining the same potential difference between the computer and the human body. It simply removes the extra charge from the human body. This safety device is highly recommended for computer repairing individuals and electricians.

HOW TO USE AN ANTI-STATIC WRIST STRAP LAPTOP

Now, let’s get to know how to use an anti-static wrist strap laptop. There are several ways to do so but the right one is a bit technical and confusing.

TIPS FOR USING THE WRIST STRAP

  • Work outdoors if the air is humid. This is necessary because moisture can prevent static build-up.
  • To avoid damage from static electricity, do not touch the circuit.
  • Stay away from edges and heat sinks as they are less susceptible to static electricity.
  • Don’t go well with bracelet mats. The mat must be removed for the machine to work.
  • If you are using synthetic fibers, do not rub them to avoid static electricity.

The anti-static wrist strap needs to be placed on the wrist, but you can use it anywhere on the body. The part of metal on the strip should touch the skin of the human who’s wearing it. Adjust the strap if it’s not touching your skin.

PROCEDURE NO. 1 – GROUND ANTI-STATIC STRIP FOR POWER SUPPLY

Have you followed the above-mentioned measures? Now, observe the given steps and begin.

  • First of all, turn off the power supply connected to your laptop. Use the switch at the back of your laptop to turn off the unit.
  • Now, plug the power cable into your electric outlet.
  • It’s time to apply the alligator clip to the anti-semantic wrist strap.
  • Attach the chip to the metal grill into your laptop’s power supply.

To hold it firmly in place, a clip is needed so make sure it is attached with the metal. Also, to prevent the clip from closing, use your hands to move the components inside.

PROCEDURE NO. 2 – GROUNDING PIN METHOD

The second process to use the wrist strap is through the ‘Grounding Pin Method’. This method is one of the best by grounding yourself on your tower.

The grounding pins are available in the market easily. By using pins, you can land on the grounding pins while wearing straps. In this method, you have to touch the metal with your skin as highlighted above.

Now, connect the alligator clip where you have a grounding pin. Before attaching the pins to the hook, don’t forget to cut off the power supply.

NOTE: This method is slightly harmful so you have to be cautious while implementing it. Always analyze the place of your grounding pin.

WHEN YOU SHOULD NOT WEAR AN ANTI-STATIC WRIST STRAP

You should not wear an anti-static wrist strap every time while dealing with your laptop. Little dealings with your laptop don’t demand wearing the wrist straps.

Here are few cases where you shouldn’t be wearing the wrist strap.

  • While changing your network adapter.
  • Plugging and unplugging of the mouse from back of PC.
  • Plugging and unplugging of the keyboard from the back of the laptop.
  • When operating with Cathode Ray Tube (CRT) monitor.

FINAL WORDS:

This was all about ‘how to use anti-static wrist strap laptop’. Many people usually say they don’t need it, but it is advisable to use the wrist strap to protect your device and yourself from any damage.

Leave a Comment